Contact Us

Move your Wi-Fi extension to your Wi-Fi router. Insert the extension cord into the power source as an electrical outlet. Connect your Range Extender to your PC or Laptop and open a web browser. Type default IP address of WiFi Extender in the address bar and press the Enter key. If is not open, contact an expert technician.

WiFi adapters and WiFi extensions improve your WiFi signal to a minimum, but they do it differently. The Wi-Fi repeater adds up directly to your router and creates a new Wi-Fi network. A WiFi router connects to your wireless network and transmits your existing network information.

Wi-Fi extensions can, of course, extend the length of your wireless network. But their performance is limited by a number of factors, including the speed of internet connection entering your home, distance from your router, your home area requiring Wi-Fi coverage, and your family’s Wi-Fi request.

Most extension cords should be able to operate any router – you just need to make sure that the extension supports 802.11n if you have 802.11n routers. If you have an older b / g router, the 802.11n repeater should work fine, but it may not work properly.

A Wi-Fi hotspot can be a good solution to extend the Wi-Fi signal between the router and the electronic device. Wi-Fi extension cords should always be at a distance from the Wi-Fi router, about 20 feet, so that they work properly.

If Wi-Fi comes immediately from the router slower than the internet speed, the extension will reduce the internet speed for devices using the extension by about 50%.

Wi-Fi Extender is easy to reset. All you need is something called a pen or a small piece of paper. You can find the reset button at the bottom of the extension or behind the Wi-Fi extender. Click & amp; Hold the reset button using a pen or a piece of paper for at least 5 seconds or until the LED device with the extension starts to glow amber. If you are still experiencing the same problem and are looking for a better way to reset  Extender, please feel free to contact our experts.

The best place to put the extension is between your wireless router and your computer, but the extension must be in the wireless router.

Wi-Fi® Protected Setup (WPS) is a feature built into most navigators that makes it easy to connect Wi-Fi-enabled devices to a secure wireless network.

The WPS button simplifies the connection process

Click the WPS button on your router to discover new devices. Go to your device and select the network you want to connect to. … WPS sends the network password automatically and these devices are stored for future use. who router?

With other drivers, the WPS button is shared with other features. For example, in the TP-Link router below, there is a button for WPS and WiFi on and off. Just press a button to activate or turn off WiFi. Press long on one button, three seconds, enable or disable WPS.

When twice devices will exchange information and the device will connect. After a while, the WPS display will turn off and stop. This is normal, because you do not want your modem to automatically accept new devices.

The WPS button will be red if there is an error during the connection or if a time lock is detected. If this continues for more than 30 seconds, try restarting your modem.

Many users turn to our technical experts to get the answer why Wi-Fi extender is not connected. If the problem itself bothers you, don’t worry! You may experience connection issues with the extender because the WiFi is placed too close to the device’s router and extender. To prevent the WiFi extender from solving the problem, keep your WiFi devices away from things that emit radio waves, such as B. Bluetooth speakers, microwave ovens, mobile phones, baby monitors, etc.

Even if the WiFi extender is not connected to the Internet, there may be a problem if the extender is not properly connected to the router. To do this, check the cable connection between the two devices and if you see a break in the Ethernet cable, replace it immediately. This will definitely help you to solve the WiFi developer connection problem.

Another common problem that many WiFi extender users have is that my WiFi extender is not showing internet. The problem can occur when your extender is not installed correctly or you are not getting good internet from your ISP.

Firmware updates are provided to enhance the user experience when using the Internet. However, users may not be able to take full advantage of the extender after updating the firmware. If you are experiencing problems with your WiFi Extender after a firmware update, you may have updated the wrong firmware version or it may be corrupted on your WiFi device. To fix this, you need to reset the WiFi Extender to its default settings and then reinstall it.

Scroll to Top